Skip to content
Skanyx
DTC/P0302·Skoda

P0302 on Skoda: Causes, Symptoms and Fix Cost

Quick Answer
High SeverityNot safe to driveSkoda

P0302 on a Skoda indicates your engine's computer has detected consistent misfires specifically in cylinder 2. This single-cylinder code narrows the problem to that cylinder's ignition coil, spark plug, fuel injector, or internal compression, making targeted diagnosis significantly easier compared to a random misfire code like P0300.

Repair cost on Skoda35 - €1800

Connect any standard Bluetooth OBD2 adapter to your Skoda and Skanyx tells you what P0302 means on that engine, whether it is safe to keep driving, and what the fix should cost. Free on iPhone and Android.

Get Skanyx free

What does P0302 mean on a Skoda?

The Quick Answer above is the generic definition. What follows is what is documented for the Skoda models that log P0302, checked against manufacturer data and owner reports.

Skoda Octavia

2005-2024

The Octavia shares the EA888 and EA211 engines with VW Golf. The 1.8 TSI in Mk3 models is known for ignition coil failures. The 1.4 TSI can develop timing chain stretch affecting valve timing on cylinder 2. Regular coil and plug changes at 60,000 km prevent most misfires.

What causes P0302 on a Skoda?

Beyond the generic causes listed on the main P0302 page, these are the documented Skoda-specific patterns:

Skoda OctaviaIgnition coil failure on 1.8 TSI
Skoda OctaviaTiming chain stretch on 1.4 TSI affecting valve timing

How to diagnose P0302 on a Skoda with OBD2

Follow these steps to pinpoint the root cause of P0302:

  1. Read freeze-frame data and note engine RPM, load, and temperature when the misfire occurred
  2. Swap the ignition coil from cylinder 2 to a different cylinder. Clear codes and drive. If the misfire code moves to the new cylinder, the coil is faulty
  3. Inspect the spark plug on cylinder 2 for wear, oil fouling, or abnormal electrode erosion. Replace if needed
  4. Test the fuel injector on cylinder 2 using a noid light or by listening for the click pattern with a mechanic's stethoscope
  5. If spark and fuel are confirmed good, perform a compression test on cylinder 2. Compare results against the manufacturer's specification and other cylinders

How much does P0302 cost to fix on a Skoda? (EUR)

Estimated repair costs for P0302 in EUR, compiled across makes. Skoda costs typically sit in the middle of each range.

Repair Parts Cost Labor Cost Total Estimate DIY Difficulty
Replace spark plug (cylinder 2) €5–€25 €30–€80 €35–€105 Easy
Replace ignition coil (cylinder 2) €25–€120 €30–€100 €55–€220 Easy
Replace fuel injector (cylinder 2) €50–€200 €60–€200 €110–€400 Moderate
Valve or head gasket repair €150–€600 €400–€1200 €550–€1800 Professional

Prices estimated as of March 2026. Costs vary by region, vehicle, and shop.

These codes commonly cluster with P0302 on Skoda vehicles:

Looking for the full P0302 reference (all makes, full diagnosis flow, complete repair cost matrix)?

See the main P0302 guide
Skanyx · Skoda

Diagnose P0302 on your Skoda

Your car logged P0302. Skanyx reads it on any standard Bluetooth OBD2 adapter, tells you whether it is safe to keep driving, and shows the €35-€1800 repair range so you know the number before a shop quotes you. Free on iPhone and Android, and you do not need to be a mechanic to read it.

Get Skanyx free